VPA Vapor Riser


The VPA Vapor Riser is a 13" ILF Riser designed to accommodate any longbow or recurve ILF limbs from any manufacturer on the market.  It is machined from solid 6061-T6 aluminum bar stock, which makes for a perfect blend of durability and weight. (The VPA Vapor Riser weighs approximately 1.5lbs)  Having 1 inch deflex, the Vapor Riser is balanced to make for a more forgiving shooting experience.  The Vapor Riser also has lateral limb adjustments to adjust limbs to be aligned on center.  The Vapor Riser is designed with 20 degree limb pad angles. (Please note: the total weight of your riser setup would be based on whatever the limbs are marked as. 1 to 1 ratio) The riser is cut 3/8" past center to accommodate a plunger or hard stop making your arrows fully tunable.  (Please note recommended range adjustment for limb bolts is 4 turns out from bottom)The Vapor Riser is designed with a radiused shelf, giving shooters clearance to shoot right off the shelf. Most ILF riser grips will fit the Vapor Riser, however we offer a low, medium, and high wrist grip designed specially for consistent hand placement.  (Brace height is approximately 8") All of the hardware is made from stainless steel and aluminum making the riser completely weatherproof.  Most limbs can be adjusted up or down 2 to 3 pounds.  The riser is complete with AMO holes for a quiver and other archery accessories.  Once you try the Vapor Riser we think you will agree, it is the most versatile hunting riser there is!